Anycubic Wash 2.0 Bucket bottom sifter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use the sifter directly in Anycubic Wash&Cure 2.0 bucket so you get more room for large model without wire basket
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 315
- Makes
- 3
- Views
- 1,412
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Built a Wash/Cure 2.0 basket mesh sifter FDM to solely work with bucket without the wire bucket. I want this because the wire basket takes too much space all way around so sometimes the big models won't fit in.. (I don't have wash/cure plus.)
Solution agitates very well with it... Also When big model float, I can use the wire basket to sit on bucket side ribs and press it down.
You can still use the wire basket on top if you want.
Part should come out loose fit so you can take it out if it goes bad or installed incorrectly.
Suggest PETG, bright color so you can tell the sifter in bucket even when IPA is cloudy.
Infill go above 60%.
No support.