1 / 1
Larger Skew Calibration Square
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Skew calibration square for larger printers (300mm calipers required)
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 66
- Makes
- 0
- Views
- 426
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I really like Vector3D's Califlower but find that for my larger printers, scaling the model up ended up getting rather expensive. I decided to design my own to work with 300mm calipers to help better dial in my skew correction for my Voron 2.4 and Trident. This model works with the Klipper skew calibration method. I was able to get my post-correction skew down to 0.01 degrees on both the 2.4 and Trident which is within my tolerances.