1 / 6
Radig AVR Node Housing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the "AVR Node - DMX Ethernet Gateway" from Ulrich Radig
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 29
- Makes
- 0
- Views
- 325
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The housing is suitable for the “AVR Node - DMX Ethernet Gateway” from Ulrich Radig.
The kit is required: LINK
One XLR socket e.g. Neutrik NC3 FD-S-1-B
The fixing plate: Neutrik MFD or a printed nut holder
A few M3 countersunk screws (2 M3x 8, 4 M3x6 and 4 M3x 16)
8 M3 nuts (They are inserted by interrupting the print at the proper layer)
And a socket (outer diameter 8 mm) for the power supply plug.