1 / 10
NinjaFlex on the Prusa MINI+ (work in progress)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a work-in-progress to experiment with NinjaFlex on the Prusa MINI+ Current status: Mostly working, YMMV. :o)
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 118
- Makes
- 1
- Views
- 928
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
The attached 3MF files contain a 3DBenchy with a new custom filament profile.
- Print Settings: 0.15mm QUALITY (stock, no changes)
- Filament Settings: NinjaFlex TPU 85A (custom profile based on Generic FLEX)
- Printer Settings: Original Prusa MINI & MINI+ (stock, no changes)
Essentially I'm aiming to keep all the changes required in the “Filament Settings”.
The numerical prefix of each of the files is the test iteration, e.g. “1” is the first, “3” is the third.
Change log:
- Version #1 - mostly stock copy of the “Generic FLEX” profile, experienced a partial/block or under-extrusion early in the print but recovered later and completed.
- Version #2 - retraction set to 3mm @ 30mm/sec, part rotated 45°, completed ok, leading edge of the boat warped a little, probably lack of cooling.
- Version #3 - retraction set to 3.5mm @ 30mm/sec, part rotated pointing backwards, part cooling fan set to automatic between 50-100% from later 2. Much better features from improved cooling.
My Printer setup:
- Prusa MINI+
- Nozzle X 0.4mm
- Bondtech Extruder with IFS
- Latest beta firmware, esteps are in firmware, not the 3MF / Gcode.