Steering stop protector cap for KTM EXC, Gasgas, Husqvarna
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protects the lower triple clamp avoiding the hard impact of the steering stop screw.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 128
- Makes
- 1
- Views
- 1,094
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
In the case of a crash the lower triple clamp hits the steering stop screw causing marks, scratches and sometimes breaks the triple clamp. One of the detailed pictures shows some damages caused by the regular steering stop screw.
I replaced the screw by a cylinder head screw and added the cap. A detailed picture shows the cap after a crash. You can see the impact marks. The triple clamp did not suffer any additional damage.
The cap is printed of Nylon PA12 without carbon or glas fibers. A TPU with a high shore should work as well. Use 100% infill. The cap has a very tight fit. I used a soft hammer installing the caps.