1 / 4
Ender 3 Pro PSU relocation - printer base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of mojobox's PSU relocation for Ender 3 Pro. It allows to mount the PSU in the printer base with fan facing down.
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 156
- Makes
- 2
- Views
- 953
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Two brackets that allow you to mount your Ender 3 Pro PSU inside of the printer's base. This will not fit on the regular Ender 3, as it uses a different PSU.
Bolts that you will need:
- 4pcs M5x16 to screw into 40x40 aluminum extrusions (I was able to screw them in without tapping),
- 2pcs M4x10 for attaching PSU to the brackets (from the back),
- 1pc M4x6 for attaching PSU to the brackets (from the top),
- rest can be reused from the stock PSU mount.
Printing tips:
- Recommended filament: PLA or PET-G (ABS or similar can be used if you can print these relatively tall parts without issues such as layer separation),
- a big nozzle (0.6mm or larger) is recommended,
- no supports needed.