1 / 6
N20 Gearmotor Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lightweight bracket for a N20 motor, fastened using two M3 socket head screws.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 101
- Makes
- 0
- Views
- 438
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Lightweight mounting bracket for a N20 motor, fastened using two M3 socket head cap screws. It covers entire gearbox of the motor. The arrow points in the direction of the output shaft (motor won't fit the opposite way).
Print Settings
Supports:
Yes
Infill:
100%
Nozzle:
Not larger than 0.5mm (I used 0.3mm)
Filament:
Recommended PET-G (as I used) or PLA