KWC Desert Eagle Stripper Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stripper clip for the KWC desert eagle. Feeds 21 bbs into the mag without removing it from the gun
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 49
- Makes
- 0
- Views
- 599
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Stripper clip for the KWC desert eagle. Feeds 21 bbs into the mag without removing it from the gun.
You only need to print one of the pusher pieces per stripper clip. I recommend the two sided one, but the one sided one works too.
You'll need 4 M3x30 screws, 4 M3 nuts, and one pen spring.
The bb stop stops bbs from falling out unless you push them past. You need to hold it back while filling the stripper clip.
In my experience one CO2 capsule is enough for two full mags, or one mag plus one stripper clip reload
THIS ONLY WORKS ON THE CYBERGUN/KWC DEAGLES, as their feed lips are far enough apart.