1 / 2
Hexagonal Infill Display
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A grid of hexagons labeling and containing each of the 17 different infill patterns in PrusaSlicer!
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 76
- Makes
- 0
- Views
- 749
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Public Domain
A simple set of models for a visualization of the different infill patterns compatible in PrusaSlicer. I have printed these with the default 15% infill, but you may change the value as you please.
To show the infill, the following settings should be changed:
- Print Settings > Layers and perimeters > Horizontal shells > Solid layers: Top: set to “0”
- Print Settings > Infill > Infill > Fill pattern: set to desired infill pattern.
- *The .gcode and .3mf files already have the correct settings to enable the visual infill.
Note: the tabs are very tight, could be changed to a higher tolerance for easier arrangement.