DIY Microfilter Adaptor for Samsung Bespoke Jet AI Vacuum Cleaner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
replacement filter.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 57
- Makes
- 0
- Views
- 783
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Hi, discovered, that there are no replacement micro filter available yet for the (my) new Samsung Bespoke Jet AI .
i didn't noticed that, since i ordered the wrong filter set.
So i created parts, to build a spare filter. You need a spare filter fitting the older Bespoke jet.
pry out the the inner cage with the filter cloth. Than carefully pry off the filter cloth from the cage.
remove the little magnet.
Assembling :
Fix the cloth to the cage with the ring.
the upper and lower ring snap together but need a litte superglue of course.
put back the rubber ring from the original.
squeeze the new cage (with ring) into the glued part. (it's tight but will fit)
place the magnet in the hole of the magnet holder ring an snap it in place.
happy vacuuming :)