1 / 8
Vespa steering bearing tool (Lenkkopflager Einzugswerkzeug) — image 1
1 / 8

Vespa steering bearing tool (Lenkkopflager Einzugswerkzeug)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a basic tool to install the steering bearings in the frame of old Vespas. Measurements are based on this. What…

Rating
5 / 5
Likes
23
Downloads
115
Makes
3
Views
747
Reviews
1

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

This is a basic tool to install the steering bearings in the frame of old Vespas.
Measurements are based on this.

What you need:

  • a M16 threaded rod
  • 2x washers and nuts for the M16 rod
  • 4x M3 nut and bolt (25-30mm) In order to get a good surface finish I split each part in the middle.
    You can either screw the two halves together using M3 nut and bots or you just glue them together.

    Printing with lots of infill is strongly recommended.
    I printed with PLA, PETG should work even better.

    Print Settings

Printer:

Craftbot

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

100%

Filament: Das Filament PLA Multicolor Polarlicht

Category: Automotive

Tags