1 / 17
greenhouse frame connector
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
set of connectors to build a broomstick greenhouse.
- Rating
- 0 / 5
- Likes
- 32
- Downloads
- 99
- Makes
- 0
- Views
- 854
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- GNU General Public License v3.0
update 2025.0516
- added OpenSCAD file
update 2025.0513
- added 23.3-corner3_roof_45.3mf
This part is needed to build 45° angles roofs
DIY broomstick greenhouse
For indoor / outdoor usage
This is an ongoing build process.
The 12 connectors are made for 23.3 mm diameter broomsticks
I will show the final greenhouse if all needed prints are done and we have build one.
How to print
For our own we chose ASA and print the connectors with:
- 0.4 mm layer height
- 0.8 mm extrusion wide
- 0.6 mm nozzle
- 3 perimeters
- 3 mm top layer
- 3 mm bottom layer
- 0% infill
- no supports
- 15 mm BRIM
- 250°C
- 110°C bed temperature
- 0.1 mm layer height between 25.8 and 28.1 mm to reduce overhangs
Missing parts?
If you think that beside of this connectors other ones are useful too, tell me in the comments.
Other broomstick diameters?
If you need a different broom stick diameter, tell me in the comments.
Pretty sure that i can add them.