Digits and support for TROMMA Ikea Clock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Digits and support for Ikea Clock TROMMA. Split the digits in multiple objects and arrange them to the build plate.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 84
- Makes
- 1
- Views
- 1,043
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Digits and support for TROMMA Ikea Clock
I used black PETG for the digits and white PETG for the support.
Split the digits in multiple objects and arrange them to the build plate.
For the third clock I printed all at once, starting with white PETG and changing to black at 3.6mm height.
I printed them with 0,2mm layer height, 3 perimeters, 5 layers top and 4 layers bottom, 15% infill.
One M3 x 16mm screw and one M3 nut is required for the support.
30pcs screws 2,9x4,5 (ex. 5001390 BOSSARD) are required for the digits.
Print Settings
Printer: MaxMicron and also PRUSA MK3S+
Rafts: No
Supports: No
Resolution: 200
Infill: 15
Filament: Generic PETG Black and White
Category: DIY