Kitchen sink shelf
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Narrow shelf for sponge/soap that drains into the kitchen's sink
- Rating
- 4 / 5
- Likes
- 21
- Downloads
- 147
- Makes
- 1
- Views
- 824
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall-mount shelf for a kitchen's sponge, soap or other wetware that drains directly into the sink.
This was tailored to my sink, which is mounted pretty close to the wall. Oh, and it's full of those sweet, sweet hexagons.
Wall-to-drain distance: ≤45mm.
Length: 200mm
Depth: 70mm
Max load: 2kg (PLA)
Recommended material is PLA (PETG is a bit too flexible), printed vertical as provided. No supports required.
For fixing I used 1mm acrylic tape (also called “nano tape”), which is accounted for in the design to give a perfectly flush top edge, as pictured. When placing the adhesive leave a gap of 5mm from the top edge. Acetic silicone would also be a good choice.