1 / 5
Neopixel Jewel Burning Man Pendant — image 1
1 / 5

Neopixel Jewel Burning Man Pendant

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Burning Man pendant for my niece, the idea is to breath some color into it with a Adafruit neopixel jewel.

Rating
0 / 5
Likes
5
Downloads
75
Makes
0
Views
301
Reviews
0

Updated at source:

Model information

Category
Props
License
Creative Commons — Attribution — Share Alike

Burning Man pendant for my niece, the idea is to breath some color into it with a Adafruit neopixel jewel and a trinket. There's a space for the neopixel jewel to set, along with ample space for trinket & lipo battery: Check here for the code I started with: https://learn.adafruit.com/10-minute-neopixel-necklace/introduction

It is a work in progress. For now I'll probably use velcro to hold the guts in, but may make something more permanent in the future. There were a few mesh errors, so I ran the .stl through meshmixer and uploaded that as "Neopixel Jewel Burning Man Pendant-fixed.stl" - use this one if you have problems.

-Added photo of results using Prusa's ColorPrint, using glow PLA for the main body and silver for the top

Video: https://youtu.be/xRj2uyxRQ-s

Print Settings

Printer Brand:

Prusa

Printer: 

Prusa MK3S

Rafts:

Doesn't Matter

Supports: 

Yes

Resolution:

.2mm

Infill: 

20%

Notes:

I printed using supports at .2mm layer height until 13.64mm's, and then switched over to .1mm layer height for the rest of the print- this was to increase the quality of the emblem on the top. It will be fine if you just use the .2mm layer height for the entire print.

Material: Hatchbox PLA

Bed: 60

Nozzle: 225

How I Designed This

I fumbled my way through tinkercad to design this: https://www.tinkercad.com/things/h2RzVScw1Rv

I mixed in the emblem on top from this great tinkercad project: https://www.tinkercad.com/things/cipqIEOGN7u-burning-man-pendant

 

 

 

Category: Coins & Badges

Tags