1 / 7
Led Navigation Light OSCULATI
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modification of the mooring navigation light.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 182
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modification of the mooring navigation light. The possibility of placing the second light above the original one. Inside, it is advisable to supply an iron pad or a 20mmx2mm magnet according to the polarization of the magnet on your light. Then stick the printed mat on this place.
Printed from PETG, if the light is still placed outside, use ASA as it is UV stable.
Variable layer height. Layer 0.16 for fiber only, otherwise printed at 0.28. Supports only below the center of the cone.