1 / 4
Skateboard Rails
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Skateboard rails optimized for grinds on copings or railings.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 72
- Makes
- 0
- Views
- 607
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Skateboard rails optimized for grinds on copings or railings or just round edges.
It works perfect for the most ramp-coping on Planet.
I prefer the 5 screws Version. 4 screws are enough to hold the rails, but on rougher unterground you will hear it.
I recommend to print the “Rail_360mm_5_Screws_Print_Location.STL” first.
You also need 5 screws of 2,5 x 10 mm
https://www.spax.com/de-de/p/universalschraube-vollgewinde-senkkopf-kreuzschlitz-z-4cut-yellox.html?variant=1081020250105
Print advice:
- You need a Baseplate of min. 300 x 250mm otherwise you have to split the print.
- Material: PETG or ASA-X worked fine.
- Infill: 100%
- Use a Brim otherwise it will warp by 100% infill