1 / 4
vault chest (print-in-place box, varoius sizes) — image 1
1 / 4

vault chest (print-in-place box, varoius sizes)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

a chest with a twist lock, print-in-place, various sizes

Rating
5 / 5
Likes
124
Downloads
851
Makes
15
Views
2,593
Reviews
16

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Another box in some kind of heavy/armored/industrial/SciFi design (similar to the vault crate), but this one has a clasp with a print-in-place screw on the front that locks the box shut, and no removable nut that can go missing. I'm a bit proud of that mechanism that I've not seen used elsewhere.

I've added a couple of different sizes. If you need a different size, leave a comment and I might add it; the "mini" is the smallest reasonable size, the “long” is long enough for most pens and can be used as pencil case. The numbers indicate inside dimensions. The boxes shown in the photos are the “2-decks-of-cards” and the “small” version. 

Printing: 

It's a print-in-place model, so no assembly required, also no support — just print and use. 
However the hinges have medium-tight tolerances and require a well adjusted printer. Maybe try one of the smaller models first, and if the hinges won't move, try reducing the extrusion factor (filament settings) or maybe the XY size compensation (advanced print settings, set to a slightly negative value, e.g. -0.05mm).

0.4mm nozzle, 0.2mm layer height, standard settings.

Tags