1 / 6
BigTreeTech Pad7 Flat Extrusion Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a sleeve flat mount for the BTT Pad7. Meant for Ender 5 series, but use it anywhere it fits.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 111
- Makes
- 0
- Views
- 680
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a mount to put my BTT Pad7 onto my ZeroG Mercury One.1 converted Ender 5 Plus. This has four holes, so mounting could be on any flat extrusion, in almost any combination. As long as the plugs have clearance to the rear inputs, mount it anywhere!
- BTT Pad 7 Bracket. Simply slide the pad in the bracket, snug fitting but still removable.
- 4x M5 mounting holes. Best when paired with a M5-12 screw and T-Nut.
- STEP file is included, feel free to use the bracket and design your own square to fit your printer.
This was successfully printed in PETG with a .6 nozzle. Make sure supports are enabled for the two retention angles on the “left” side of the controller/screen.