Cover Hinge upgrade for CABBY Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upgrade to provide a possibility for additional hinge in the middle of the top cover door.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 47
- Makes
- 3
- Views
- 381
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Upgrade for CABBY enclosure: https://www.printables.com/model/585697-cabby-enclosure-for-original-prusa-xl
Upgrade to provide a possibility for additional hinge in the middle of the top cover door. This is by no means a necessary upgrade, but a personal preference you might share.
As this is purely additional upgrade, the steps are the same, independently of if you already have the original CABBY enclosure finished already or not:
- Drill additional holes in the top cover for mounting of the hinge fixation
- Mount the hinge
- Identify the hole positions of the needed holes in the top cover door
- Drill additional holes in the top cover door
- Mount the door screwcovers in place
Needed hardware, additionally to original CABBY enclosure:
- 1x Cover_Door_Hinge_1x_V1.1 (see files in this model)
- 1x Cover_Door_Hinge_Fixation_1x_V1.2 (see files in this model)
- 1x Cover_Door_Hinge_Inside_1x_V1.0 (see files in this model)
- 1x Cover_Door_Fixation_Middle_1x_V1.0 (see files in this model)
- 6x Socket head cap screw M6x12 with 9mm/10mm head ⌀
- 4x Low profile square nuts !magnetic! M6 10mm x 2mm (DIN 562)
Additional info:
- Available files for 9mm screw head or with 10mm screw head (which is more typical one according to DIN912 or ISO4762)
Edit: Updated Cover_Door_Hinge_Fixation_1x_V1.2 to allow the cover door to open up completely and lay flat on top of the cover. This also needs the two normal hinges from the enclosure need to be changed, in case you had those parts already installed.