Gridfinity Tool Base (Grid 9x13)

In order to put my tools into good order I needed the 9x13 grid which I created from a SCAD file. Don't remember who it was, but thanks!

In TinkerCad I added some borders to fit the grid into my tool box drawer. I had to fill 410x560mm, which ended into a 9x13 grid with some borders. Then I cut it into four pieces, with an overcut of 0.1mm on each side (!) of the cuts. Means in theroy a 0.2mm gap, but after your printer overflows a little bit you still have some space for glue. Aftere glueing I fixed the wet grid with some gridfinity bins that reached over some splices.

Printed in PLA on my Voron 2.4 (350).

Here my individual gridfinity bins:

Bin1 for Large Screwdrivers: 
https://www.printables.com/de/model/786274-gridfinity-arrangement-for-old-large-screwdrivers-

Bin2 for my Electric ScrewDriver Set:
https://www.printables.com/de/model/786286-gridfinity-arrangement-for-electric-screwdriver-ki

Bin3 for Allen Key Set and individual keys. You never know where to put them, nor where to find them. LOL.
https://www.printables.com/de/model/786295-gridfinity-arrangement-for-allen-key-set-bin3

Bin4 for Small Screwdrivers
https://www.printables.com/de/model/786300-gridfinity-arrangement-for-small-screwdrivers-bin4

Bin5 for Watch Screw Drivers (and others)
https://www.printables.com/de/model/786303-gridfinity-arrangement-for-watch-screwdrivers-bin5

Bin6 for Stanley and Hazet Screw Drivers
https://www.printables.com/de/model/786307-gridfinity-arrangement-for-screwdrivers-bin6

Bin7 for Other Screwdrives (I am used to the sequence)
https://www.printables.com/de/model/786310-gridfinity-arrangement-for-other-screwdrivers-bin7

Bins 8 / 9 / 10 are standard Bins 1x5x3h / 1x3x3h / 2x6x3h, just look into this files section.

Happy printing.

Explore my other Printables: https://www.printables.com/de/@Tritschi