1 / 3
Fillet / Round Measuring add on for Vernier Calipers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attach this simple one-piece jig to your calliper base to measure the radius of large curves.
- Rating
- 4.667 / 5
- Likes
- 61
- Downloads
- 204
- Makes
- 3
- Views
- 2,163
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution
Have you ever had to guess the radius (or diameter) of a curved object?
This tool helps you measure a numeric answer to that question!
Radius = Caliper Reading X 2.414
How to use:
- Insert the base of your caliper in the slot of the tool
- Hold the tool up against the “outside” of the curve
- Extend the caliper until the depth gauge just touches the curve
- Take the reading from the caliper and multiply by 2.414
Does not need supports - turn bridging ON
0.2mm layer height works fine. Print does not benefit from smaller layers