1 / 3
Bottle Holder holding most PET and glass bottles (MMU- & SingleColor-Version available) — image 1
1 / 3

Bottle Holder holding most PET and glass bottles (MMU- & SingleColor-Version available)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

IMPORTANT: Carefully read print settings to avoid problems!!! Bottle Holder which holds most PET or glass bottles. The…

Rating
0 / 5
Likes
9
Downloads
29
Makes
0
Views
336
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial

IMPORTANT: Carefully read print settings to avoid problems!!!


Bottle Holder which holds most PET or glass bottles. The first version was made to hold Coke bottles up to 2L but several other bottles did not fit. Their neck diameter was smaller and they dropped or bigger and the clamps needed a lot of pressure to fix the bottles or even broke.

After several design changes, the latest version fits and holds almost any PET and even glass bottles.

If you are unsure, just print one clip and the TestBase to try, if the holder fits your favorite drink bottles.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0,2

Infill:

see notes

Notes:

You should use PETG for the print as the whole structure will need to withstand high bending forces. More brittle filament like PLA won't work.

Base:

  • Make sure to use minimum 5 solid layers on top and bottom
  • minimum 50% infill (gyroid pattern recommended for more strength and stability)

Clips:

  • 100% infill.

Post-Printing

Parts needed

There are two options to print the holder and one for testing purposes:

Holder with single color base

1x Bottle Holder_Base_SingleColor.stl

5x Bottle Holder_Clip.stl

Holder with multi color base (MMU or othe multimaterial printer needed)

1x Bottle Holder_MMU_Base.stl with Bottle Holder_MMU_Logo.stl as multimaterial print

5x Bottle Holder_Clip.stl

Test print to check compatibility to favorite bottle types

1x Bottle Holder_TestBase.stl

1x Bottle Holder_Clip.stl

Assembling

Press the clips to the base as seen in picture below. This might need some force. If clip and base are not even after assembling, try to carefully hammer the clip in place.

Category: Organization

Tags