Cable tie through plates
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.48 – €0.59 net (excluding VAT)
For file: Kabelbinder Clip Plakate V2 Einzel_0.2mm_PLA_MK3S_34m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.54 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 34.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Reinforcement for feeding through cable ties and 2.5mm plates
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
The reinforcement allows 2.5mm thick panels to be attached to pillars or similar without bending. The bracket is pressed in firmly and locks securely into place.
- 0,2mm Qualtity
- 25% Gyroid Infill