1 / 5
Altoid Pinning Tray and Parts Holder — image 1
1 / 5

Altoid Pinning Tray and Parts Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I don't know about you, but I seem always to be acquiring tins like these so I thought time to put them to good use.…

Rating
5 / 5
Likes
28
Downloads
198
Makes
3
Views
1,065
Reviews
3

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution

I don't know about you, but I seem always to be acquiring tins like these so I thought time to put them to good use.

After printing out a number of trays to hold things like lock pins, springs and other gubbins I thought it may be useful to have a pinning tray and tool holder I could slip into a pocket for when I'm at a lockpick village.

The kit consists of two parts:

The pinning tray - this is designed to sit atop the parts tray below. It is a 7 row pinning try with space to hold the lock body and core. The round hole in the tray is there to enable easy removal from the tin but I can also be used to hold a core in the upright position.

The parts tray - this is designed with areas to hold plug followers, shims and small pinning tweezers.

Print Settings

Printer:

GEEETECH A10

Rafts:

No

Supports:

No

Resolution:

0.20

Infill:

50%

Filament: Geetech PLA White & Black

Notes:

Depending on your printer and if your prints tend to produce an elephant foot you may need to gently sand the edges of the pinning tray so that it makes removal easier.

Also I would suggest using 50% infill for the pinning tray and the 25% for the parts tray.

Category: 3D Printing

Tags