The Owl House Bonesborough Buildings
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€8.86 – €10.83 net (excluding VAT)
For file: bonesborough buildings_0.4n_0.15mm_PLA_MK3S_11h49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.84 excluding VAT (range midpoint).
- Weight reported by the author
- 82 g
- Print time reported by the author
- 11.82 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Models of buildings in the town Bonesborough from The Owl House
- Rating
- 0 / 5
- Likes
- 36
- Downloads
- 189
- Makes
- 0
- Views
- 686
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Architecture & Urbanism
- License
- Creative Commons — Attribution
Various buildings from the show The Owl House.
Ten buildings which surround the Covention Hall. These are the Book Nook, eight non-descript buildings and a tower. Also included is a gate.
Each individual building is 20-40mm long, 15-30mm wide, and 35-60mm tall. The tower is 86mm tall.
Print Instructions
| Part | Layer Height | Supports | Brim |
|---|---|---|---|
| book nook | 0.15mm | yes | |
| building 1 | 0.15mm | ||
| building 2 | 0.15mm | ||
| building 3 | 0.15mm | ||
| building 4 | 0.15mm | yes | |
| building 5 | 0.15mm | ||
| building 6 | 0.15mm | ||
| building 7 | 0.15mm | yes | |
| building 8 | 0.15mm | ||
| tower | 0.15mm | yes | |
| gate | 0.15mm | yes | |
| gate with wall | 0.15mm | yes |
The pre-sliced file contains “gate with wall” but not “gate”.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#