1 / 12
1010 Extrusion Corner Brackets and Plates
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A collection of corner brackets and plates designed for use with 1010 extrusions.
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 321
- Makes
- 1
- Views
- 879
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Corner brackets and plates to be used with 1010 extrusions.
Compatible with 1010 extrusions such as the ones from https://8020.net/ and https://www.tnutz.com/
Hardware required to mount to extrusions:
- ¼-20 x ½" BHSC Source: https://www.tnutz.com/product/imperial-button-head/
- ¼-20 T-Nut Source: https://www.tnutz.com/product/et-010-1-4-20/
If you have a need for a component not listed here, please reach out and I will work with you to provide a solution.
Print Settings
Walls:
- Minimum: 3
- Recommended: 4
Supports:
- Only required for the Gusset Corner Brackets
- Recommended support type: Tree, On Build Plate Only
Layer Height:
- 0.2mm
Infill:
- 20%-100%
- Recommended: Gyroid or Honeycomb for best strength results
Notes:
- X-Y hole compensation may be needed on the plates depending on your printer tolerances