Capped 2 Gang Rocker Switch Plate
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.47 – €1.80 net (excluding VAT)
For file: SwitchCoverCap_PLA210_MK3S_1h39m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.64 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 1.66 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A wall switch plate for 2 rocker switches with covers to make it more difficult for toddlers to use the switches
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
This is a variation of a basic 2 gang rocker switch plate. I have a 2 year old son who likes to play with light switches and I wanted a cover that would make it difficult for him to turn on our gas fireplace, yet still allow me to access the switches. Print 2 of the caps for each plate and glue them together (I applied a thin layer of 2-part epoxy from the back after fitting the pieces together). The access hole of the cap can be oriented at either the top or bottom of the switch depending on circumstances. With the hole at the top, it will generally be more difficult for the toddler to reach into the hole, but he will be able to turn the switch on if he does. With the hole at the bottom, the hole will be more accessible, but short fingers should only be able to access the “off” side of the switch.