Diamond Dresser for Bench Grinder and Oregon Blade Sharpener
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my design for a single-point bench grinder diamond dresser. Additionally, I have included an adapter so the…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 20
- Makes
- 0
- Views
- 397
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is my design for a single-point bench grinder diamond dresser. Additionally, I have included an adapter so the dresser can be used on an Oregon blade sharpener.
The user must supply the diamond shaft and cut ½"-13 threads on the shaft. If you can't source a diamond shaft with threads, it is best to use a lathe to cut the threads. However, I was able to cut the threads using my drill press by clamping a die in a vise and turning the drill chuck with a punch.
Because the ¼" holes are printed vertically, they should be cleaned up with a tap.
The user must also supply ¼"-20 × ½" button-head screws.
A respirator is required when using this tool to dress a grinding stone.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.15mm, but 0.10mm for Nut and Knob
Infill:
15% for Adapter Body, 20% for Body, 100% for Guide Plate, Nut, Knob, and Adapter Step
Filament:
Prusament PLA Black
Notes:
Body:
0.15mm layer height
20% infill
4 perimeters
avoid crossing perimeters
align seams
Guide Plate:
0.15mm layer height
100% infill
4 perimeters
avoid crossing perimeters
align seams
iron the top surface
Nut and Knob:
0.10mm layer height
100% infill
4 perimeters
avoid crossing perimeters
align seams
iron the top surface
Adapter Body:
0.15mm layer height
15% infill
4 perimeters
avoid crossing perimeters
align seams
Adapter Step:
0.15mm layer height
100% infill
4 perimeters
avoid crossing perimeters
align seams
iron the top surface
Category: Machine Tools