Gift Card Torture Box - OpenSCAD design
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created another gift card torture box - inspired by Bobby Thunders design, but slightly different
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 103
- Makes
- 0
- Views
- 619
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update: Optional version: top part of the box now has a recess that holds the key. (see picture). To get that, print “top-.stl”.
I created another gift card torture box - inspired by Bobby Thunders design, but slightly different:
The Box consists of two pieces only (top and bottom) and has a recess for a credit card-sized object.
The matching bolts are made using the “nut job” script by mattala at a total length of 30mm.
The nuts have been permanently fused to the bottom part. To do this, I printed the nuts first, then started the print of the bottom part, paused it after the hexagonal holes were complete (10mm height) and dropped the nuts in place. The print then continues and melts the next layer onto the nuts, securing them in place.
All printed in PLA, the box works with only 5% infill.
Parameters used for the bolts/nuts:
diameter/length of the thread: 12mm/20mm (12.8mm for the nut)
height/diameter of head and nut: 10mm/17mm