1 / 3
Dewalt DW735 Post Cap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement cap for the posts on a Dewalt DW735 thickness planer. There are two versions: One is a close replica of…
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 123
- Makes
- 2
- Views
- 964
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A replacement cap for the posts on a Dewalt DW735 thickness planer. There are two versions:
- One is a close replica of the original part with a domed top. This one will require support in the center section.
- The other is slightly different than the original but prints without support. This one has a single layer bridge supporting the screw hole that can easily be cleared by drilled out or simply pushing the screw through. (Single layer bridge assumes a 0.2 layer height)
Print Settings
Resolution:
0.2
Notes:
For the replica version you will need support in the center.
For the easy print version there is a single layer bridge inside the screw hole that you'll need to remove or push the screw thorough.
Category: Machine Tools