Peeking Kitty
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This easy to print model is a Kitten Silhouette intended to be displayed above a door. I've included 2 models. The first model has cutouts for the whites of the eyes. The second is intended for 2 color printing where it has a sunken area for the whites of the eyes. These can be set for white, glow-in-the-dark, or other color of choice. I don't recommend the 2 Color model if only printing in one color.
I recommend printing with at least 3 wall loops, 15% infill, ironing on top layers. It does require supports for the lower part of the paws. Other than that the print parameters are not critical. The thickness of the model assumes a 5/8 inch (15 mm) door molding width. You can of course adjust the Z axis thickness in your slicer to accommodate other thicknesses.
Thanks and please check out my other cat silhouettes.