Pivoting Gate Catch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a gate catch I made to keep the gate out of the way while open. Made for this gate…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Just a gate catch I made to keep the gate out of the way while open. Made for this gate (https://www.amazon.com/dp/B09JKVBHKS?psc=1&ref=ppx_yo2ov_dt_b_product_details).
Requires you to be able to lift up on the gate to release and engage it.
Wall mount is for a #6 screw, pivot is for a round head M4x10mm.
I printed it solid since it was so small and wanted to make sure it would hold up and cleaning out holes wouldn't be an issue.
Center piece could easily be replaced with something else. Dimensions in picture to help you model a replacement middle. I only made mine 15mm wide.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
.15
Infill:
100
Filament: Hatchbox PLA Gray Post-Printing =============
Did have to drill out the holes for a #6 screw as they had closed up a little, but not a big deal.
Category: Replacement Parts