1 / 6
Bit Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small bit box for six bits.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 20
- Makes
- 0
- Views
- 268
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The case consists of two parts. Each part needs support but only on the top.
After printing the parts slide them in as shown on the pictures. The lid side with the closing bracket needs to be on the side with the second closing part on ther bit holder.
The parts sits tight, use some force to slide them in. To open the box just pull the closing bracket.
Print tips:
Lid:
- infill 15%
- pla
- needs support for the top side and the closing part
Case:
- infill 15%
- pla
- add support only for the top part
- on the bottom there is a hole- no support needed
- bit holder hols don't need support