Rubber feet/riser Ender 3 v3 KE /SE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rubber feet for Ender 3 V3 KE/SE
- Rating
- 0 / 5
- Likes
- 67
- Downloads
- 315
- Makes
- 0
- Views
- 3,176
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Rubber feet/riser for Ender 3 v3 KE/SE
Printed with Extrudr Flex Semisoft A85 with 2 walls, 3 top/bottom layer, 60mms, 10% infill (please use your own settings for your TPU filament)
2 versions: Raises the printer by 10 or 15 mm.
Shown on the pictures =10mm
The small recess on the side of the opening for the original rubber foot is used to prevent the screw from resting on the foot.
Since I suspect that the original feet are not always in exactly the same position, I made this recess a little larger.
-----------------------------------------------
Gummifüße/Erhöhung für Ender 3 v3 KE/SE
Gedruckt mit Extrudr Flex Semisoft A85 mit 2 Wänden, 3 oberen/unteren Schichten, 60 mms, 10 % Füllung (bitte verwende deine eigenen Einstellungen für dein TPU-Filament)
2 Versionen: Erhöht den Drucker um 10 oder 15 mm.
Auf den Bildern zu sehen = 10mm
Die kleine Aussparung an der Seite der Öffnung für den Original-Gummifuß dient dazu, dass die Schraube nicht auf dem Fuß aufliegt.
Da ich vermute, dass die Original-Gummifüße nicht immer genau an der gleichen Position sitzen, habe ich diese Aussparung etwas größer gemacht.