1 / 6
Another Spool holder with bearing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Another spool holder no one asked for, but everybody needs...
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 37
- Makes
- 1
- Views
- 209
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is another spool holder no one asked for, but everybody needs…
The holder can be printed in 2 orientations:
- printed flat, but support below the bearing cut out is necessary
- printed at 45° with modelled support to break off later, this saves 20% of filament
A brim with 2-3mm is recommended when using PETG.
The roller prints in 2 halfs, and is held together with 2 press fit 608 bearings.
The inner diameter of the roll should be larger than 52mm, max width is 68mm.