1 / 3
Red bull Max Verstappen hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Smartfil RECICLADO NEGRO Transmission Distance: 0.4
PLA Smartfil RECICLADO ROJO Transmission Distance: 2.3
PLA Smartfil RECICLADO AMARILLO Transmission Distance: 5.8
PLA Smartfil RECICLADO COLD White Transmission Distance: 4
Swap Instructions:
Start with NEGRO
At layer #11 (0.96mm) swap to ROJO
At layer #15 (1.28mm) swap to AMARILLO
At layer #21 (1.76mm) swap to COLD White for the rest.