Ergonomic Nozzle Brush
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.53 – €1.87 net (excluding VAT)
For file: nozzle-brush_0.15mm_petg_mk3s_1h42m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.70 excluding VAT (range midpoint).
- Weight reported by the author
- 23 g
- Print time reported by the author
- 1.69 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A more ergonomic version of the felt tip nozzle brush.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 1
- Views
- 195
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
This is my version of the nozzle brush from @MakersMashup. It is more ergonomic and has only one side for felt pads. The design is inspired by other tools and grips and purposfully kept simplistic. When printed upside down on a textured print bed it has a nice and grippy surface for the thumb.
Highlights
- Takes 30mm / 1 inch square felt pads
- Ergonomic
- Grippy thumb rest when printed on textured sheet.
Print Settings
It is best printed with the flat surface on a textured sheet using a support for the hole were the felt goes. The following settings make it very easy to remove the support.
- material: PETG
- layer height: 0.15 mm - 0.2 mm
- infill: 25%
- Top contact Z distance: 0.3 mm
- XY separation between an object and its support: 1.5 mm