Baritone Ukulele Saddle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this to fit an Alvarez baritone ukulele, but you should be able to scale it to fit most any ukulele or guitar.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 38
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution
I bought this damaged baritone ukulele to repair and play, and after gluing up the cracks that it had in the top I found that it was still just a bit warped, causing the action to be a little low. I designed this replacement saddle that sits a couple of millimeters higher than the original. You can scale it right in your slicer to customize it for your instrument. It took a little sanding and filing around the bottoms where the brim had been to get a good fit, but it ended up working perfectly. Print with 100% infill, or enough walls to make it solid. I used bone colored PLA plus.