1 / 2
Avon S10 respirator Secondary Speech Module tool
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use for removal/insertion of the Secondary Speech Module from an Avon S10 respirator
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 26
- Makes
- 0
- Views
- 251
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This makes removing a speech module from an S10 easy. Use with a 1" spanner, adjustable wrench, or just your fingers. The module will then pop out when pushed from the rear. I found using a flat screwdriver at the edges effective. If you push in the middle then it may bend/damage the module. I suspect that in “proper” use the module must never be reused so it wouldn't matter if was damaged on removal.
Print flat-side down. Support may not be necessary, but it's only a tiny amount and pulls off easily.