1 / 1
Roller Shutter Stopper
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stopper for roller shutter
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 44
- Makes
- 1
- Views
- 254
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
A roller shutter stopper i made for my Weru roller shutters as the original stopper were too expensive for a little pieco of plastic. It should also work for other brands but first check the dimensions before using it. It's now in use for two years without any problems.
WARNING: Try at first only one stopper at one side of your roller shutter, to check, if it is not too weak or to brittle to avoid the shutter to vanish in the box. I take no responsibility for any damages or costs incurred from the use of this model.
Printing instructions:
- Use non-brittle materials like PETG or maybe a hard TPU.
- Print this item with a solid infill.