Articulated Ekans Toy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This articulated Ekans has 36 joints, with plenty of room for more!
- Rating
- 3 / 5
- Likes
- 149
- Downloads
- 644
- Makes
- 1
- Views
- 2,229
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model has only been tested on a BambuLab X1C and A1, using PLA. Expect different results if using different machines or materials. If printing on a Textured PEI plate, a brim is strongly recommended on all parts.
I do not recommend using Silk PLA on this model, as it was brittle on the smaller links/rattle on my full-colour test. Use silk PLA at your own discrepancies. HOWEVER; the single-colour was printed using Gratkit duo-tone Silk PLA, and the rattle was fine.
This articulated Ekans has 36 joints, though at the scale I have provided there is plenty of room for more links, should you want to add them! All body links, except the one closest to the “rattle”, are identical so you can copy/paste them to make the body longer.
The size I have provided is the largest I could make the full-colour version before printing time became too long. The full-colour version is inside the Bambu Studio 3mf. There is no colour data in the Prusa file.
Brims and supports are not required. The only exception is if you use a textured PEI plate, whereby a brim may be needed.
If you want to use other slicing software, please use the Prusa 3mf when importing into your slicer, as the BambuStudio one does not work.
Raw STL files are Patreon exclusives. If you want access to them, or to sell prints of this model, please consider subscribing to my Patreon: https://www.patreon.com/thomastedwards