Nuki Pro V4 Door and BKS Knob Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter plate for fill adhesion of NUKI Lock and Adapter for BKS Knob Lock and NUKI Lock.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 56
- Makes
- 0
- Views
- 541
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I removed the white cover of the lock to be able to mount the NUKI lock better. But then part of the silver door element would have peeked out over the lock. I wanted to cover that up and remove a plate where the NUKI mounting plate sits flush. Two recesses were made in order to lock the adapter plate with a 3M double-sided adhesive tape (https://www.amazon.de/dp/B08C4Y9WW2).
In my case, the silver door element is 5mm thick, 31mm wide, 71.5mm long.
The BKS Knob adapter was not available from Nuki. I reconstructed this.
STL and STEP is available. I used PETG 0.2 height and 0.4 width.