Daenerys & Jon Snow filamentpainting Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hueforge filamentpainting
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 41
- Makes
- 0
- Views
- 289
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Devil Design Black Transmission Distance: 0.3
PLA Devil Design Dark Gray Transmission Distance: 5
PLA Devil Design Gray Transmission Distance: 5
PLA Devil Design Beige Transmission Distance: 8
PLA Devil Design Vanilla Transmission Distance: 13
PLA Devil Design Light Gray Transmission Distance: 5
PLA Devil Design White Transmission Distance: 10
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to DARK GRAY
At layer #12 (1.04mm) swap to GRAY
At layer #18 (1.52mm) swap to BEIGE
At layer #19 (1.6mm) swap to VANILLA
At layer #21 (1.76mm) swap to LIGHT GRAY
At layer #23 (1.92mm) swap to WHITE for the rest.