xconnect extrusion clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
clip for the extruded part of the xconnect end. It holds in place with a zip tie.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 63
- Makes
- 2
- Views
- 436
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
clip for the extruded part of the xconnect end. It holds in place with a zip tie. Made for the female end of an xconnect. Slides in over the last bump on the cable and won't rotate, if using 2. Suggestion use 2 and line up the clip end with the notch on the cable, this way in the dark you have a 50/50 chance of getting the cable inserted correctly.
Print with the numbers flat on the bed.
Can be printed without AMS/MMS, simply change filament as follows
1-5 outer color (aka black)
6-8 white
9+ black
If printing in PETG make sure your filament is tuned. Textured PEI plate recommended. Print with flat number side down.
Printing settings (differences compared to the strength .2 profile for bambu studio)
.2 layer height
bottom shell layers = 6
bottom shell thickness 1
sparse infill density 10
honeycomb
wall loops 2
top shell layers 6
top surface pattern monotonic
no brim
Inner wall acceleration 5000
outer wall speed 60
wall generator Arachne
minimum wall width 60%
Only one wall on the first layer
precision resolution .001
seam position back
bottom z distance 0
top interface layers 3
top z distance 0