Falcon 2 Pro Rotary setup
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wanted to use my rotary with Falcon 2 Pro, but removing the drawer stopped the machine. so i made it work.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 76
- Makes
- 1
- Views
- 1,111
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
The drawer on the Falcon pro 2 is activated by magnets. So i made a bracket to replace the drawer, the magnets complete the circuit and the laser works.
It fits on the rail just under the main frame 30mm from left side.
The legs are 100mm so you can use any Rotary. I used 1mm mdf for the sides stuck on with double sided tape and the front is held on by magnets which connect to screws on front of frame.
Other than the 3d printed parts you will need.
4 x 100mm x M6 hex bolts or you could use any legs you please. And 4 x 10mm x 3mm magnets.
Hope it works for you as it as for me.