1 / 5
Hanging shower caddy
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hanging shower caddy. Snap together assembly. Optimized for 0.6 mm nozzle.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 93
- Makes
- 0
- Views
- 526
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
Printing:
nozzle: 0.6+ mm
caddy1:
PETG
layer height: 0.3 mm
line width: 1 mm
top solid infill line width: 0.6 mm
bottom layers: 3
caddy2: (x2)
PETG
layer height: 0.3 mm
line width: 1 mm
top solid infill line width: 0.6 mm
top,bottom layers: 4
perimeters: 2
Assembly:
Make sure ‘caddy2’ has smooth sides. Remove any over extrusions, bumps from top surface with a hobby knife and/or sanding. After cleaning it, you can carefully restore the shine with a mini gas torch.
Note that the back side of the tray (caddy1) is vertical.