1 / 2
BRZ/GR86 interior trunk pull handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A handle that mounts to the existing trunk latch on 2022+ BRZ/GR86, using existing screws. Fits on either/both sides.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 321
- Makes
- 0
- Views
- 2,022
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a handle to grab for trunk lid closure that I could grab from any side and angle, so here's my solution.
I printed with 45% infill on FFF (on a TAZ 6) and will do a 100% infill SLA print later (Formlabs Form 3). Weak point is the cylinder as wall thickness was limited by existing parts, and that's where the fulcrum is as you pull down.
I added to both sides (same part). Only requires one screw removal at a time using 10mm nut driver.
EDIT:
See comments for updates.