TPU gasket for the hinged riser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TPU Gasket for the Hinged riser lid for the K1 Max.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 63
- Makes
- 0
- Views
- 447
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Printed out the riser with hinges by joss27, but found it left quite a substantial gap around the top of the glass, so I designed and made this gasket to fill that gap around the sides and rear.
To print both sides needed, simply mirror the model on the X-axis when printing the other side, or if printing on the K1 Max, both models have 3mf files that can be loaded.
- Should make note:
- At the moment, when slicing, make sure to orient on the bottom face. Apparently my model from Fusion 360 isn't laying completely flat, and need to correct this. In the mean time, this is the simple solution.
- The gasket is not compatible with the riser covers, so I had to print the non diamond sides for the riser for it to be enclosed.
Hinged Riser Lid : https://www.printables.com/model/754380-k1-max-hinged-lid
Also made pins for the lid, if you don't want to use screws:
https://www.printables.com/model/793038-hinge-pin-for-k1-max-hinged-lid