1 / 12
Radio Control version of the MiniSkidi Mk3, with FPV — image 1
1 / 12

Radio Control version of the MiniSkidi Mk3, with FPV

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A version that can be controlled using standard radio control systems.

Rating
5 / 5
Likes
49
Downloads
278
Makes
2
Views
1,559
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

There is a PDF file giving the parts I used and some build notes.  The OpenTx transmitter files and “sounds” are also included in a ZIP file.

This is quite a challenging build due to its small size but great fun to operate.  Only the parts I modified are included in the STL files.  For all the other parts use the original Professor Boots files.

The main parts I changed are:
Main Housing - modified to “locate” the track motor speed controller and RC switches, and to attach a servo to operate the Left Arm instead of the N20 motor.
Left Arm - to attach to the servo.
Right Arm - to incorporate the changes I made for a quick release “Claw” wiring connector (see another of my "Remixes").
Axles and Wheels - to free up space inside the MiniSkidi and to make the Wheel / Axle interface easier to print.
Driver Cage - Visual improvements, different Leds and cable ducts, plus slots in the roof for the FPV camera to see through when the arms are raised.
Fork Lift attachment - made smaller to look more in “scale”.
New Part - “Floor” which holds down the two track drive motors (replaces the original motor clamps) and also locates / attaches the radio control receiver, FPV system, and LiPo.
New Parts for the FPV camera and its “tilt” servo system.